|
|
| Commands Arranged by Topic |
ESC EM |
| Turn Cut Sheet Feeder Mode On/Off | |
Format: |
|
|
|
ASCII code: | ESC | EM | n |
Decimal: | 27 | 25 | n |
H e x a d e c i m a l : 1 B | 19 | n | |
Comments:
The following values can be used for n:
4:Mode is turned ON.
0:Mode is turned OFF:
The command should not be used unless the cut sheet feeder is installed. It is ignored if any value other than 0 or 4 is used for n.
The ON/OFF status of cut sheet feeder mode can also be selected by DIP switch
BEL | Beeper |
Format: |
|
ASCII code: | BEL |
Decimal: | 7 |
Hexadecimal: | 07 |
Comments:
Sounds the printer’s beeper.
Command Summary