Printing

ProblemSolution

The printed position is not what you expected (continued).

Vertical printed lines do not align.

The loading position of the paper may be too high or too low. Use the micro- adjustment feature to reset the loading position so that the perforation is centered within the skip area. Refer to 3-12.

Your application program may be setting the top and bottom margins. If this is the case, turn off skip over perforation by setting DIP switch 2-3to OFF. Refer to

3-10.

The printer may be set for bidirectional printing. This can cause a slight misalignment of graphics characters. When precise printing of vertical lines is necessary, select the unidirectional print mode by sending ESC U or ESC < to the printer. Refer to 9-9, 9-10. Unidirectional printing is somewhat slower.

7-12Troubleshooting