Options
ProblemSolution
The cut sheet feeder may be out of paper. Load more paper in the cut sheet feeder’s bin. Refer to
The paper release lever may be forward to the continuous paper position. Push the lever back to the single sheet position. Refer to
The paper set levers may be pulled forward. After loading a stack of paper into the cut sheet feeder, push the paper set levers backward. Refer to
The left and right paper guides may be too close together, preventing smooth paper feeding. Adjust the position of the paper guides so that the paper can move up and down freely. Refer to
Paper may be jammed near the print head. Remove the jammed paper (temporarily remove the cut sheet feeder if necessary).
You may have loaded too many sheets in the cut sheet feeder’s bin. Remove some of the sheets. Refer to
There may be only one sheet left in the bin. (The last sheet in the bin usually does not feed.) Add more paper. Refer to
Troubleshooting