Commands Arranged by Topic
ESC N | | | Set Skip-over-perforation |
Format: | | | |
ASCII code: | ESC | N | n |
Decimal: | 27 | 78 | n |
H e x a d e c i m a l : 1 B | 4E | n |
Comments:
The variable n is the number of lines skipped between the last line printed on one page and the first line of the next page. For example, with the standard settings for line spacing (1/6-inch), and page length (66 lines), ESC N 6 cause the LX-810 to print 60 lines and then skip 6. DIP switch 2-3 performs the same function. This setting is cancelled by ESC 0 and also by ESC C or ESC C 0. The value of n must be from 1-127. Overrides the DIP switch 2-3 for the l-inch skip-over-perforation setting.
ESC O | | Cancel Skip-over-perforation |
Format: | | |
ASCII code: | ESC | O |
Decimal: | 27 | 79 |
H e x a d e c i m a l : 1 B | 4F |
Comments:
Cancels the skip-over-perforation set by ESC N. Also, cancels the DIP switch 2-3 for the l-inch skip-over-perforation setting.
