Adjusting the Loading Position

Using micro-adjustment

1.Make sure that the printer is turned on and that either a single sheet or continuous paper is ready to be loaded.

2.Press the LOAD/EJECT button to feed paper to the loading position. Then press the ON LINE button; the ON LINE light then begins to blink.

:X-JO N L 1 N E

a

OFF LINE

Note: You can use the FORM FEED and LINE FEED buttons for micro-adjustment only while the ON LINE light is blinking.

3.Press the FORM FEED button to feed the paper forward or the LINE FEED button to feed the paper backward. When you’ve set the desired loading position, you can begin printing; the ON LINE light stops blinking automatically.

Using the Printer 3 - 1 3