Rotate by 180 degrees
Select this setting to rotate your document 180 degrees, which
allows you to print closer to the bottom edge. This is possible
because the printer’s minimum top margin is smaller than the
minimum bottom margin.
Reduce or Enlarge
Use this setting to reduce or enlarge the size of your image. The
range is from 25% to 400%, but may vary depending on the
application and paper size you use.
Printable Area
Select Maximum to make your printout as large as possible on
the paper. Select Centered to position your printout at equal
distances from the top and bottom edges and from the right
and left edges.
Defining a Custom Paper Size If your paper size is not included in the paper size list in the
Page Setup dialog box, follow the steps below to define a
custom paper size.
1. In the Page Setup dialog box, click Customize. The following
dialog box appears:
dr-11A
LKeywest Ref. Guide
Rev.c
A5 size Chapter 4
10-09-97 DR, pass 0
4-20 Using the Printer Software for Macintosh