4. Double-click the My Computer icon and double-click
Control Panel.
5. Double-click the System icon and click the Device
Manager tab.
6. Double-click the Ports (COM & LPT) icon and double- click
LPT1. If you have connected your printer to a port other
than LPT1, double-click the appropriate port icon.
7. Click the Resources tab and click the Use automatic
settings check box to deselect Automatic Setting. (Make
sure there is no check in the Use automatic settings check
box.) Write down the Input/Output Range addresses
shown in the Resource settings box.
res02
8
Troubleshooting
R
Keywest Ref. Guide
Rev.c
A5 size Chapter 8
10-09-97 DR, pass 0
Troubleshooting 8-35