When printing on Photo Paper, follow the instructions below:
1. See the table below, and determine the most appropriate
paper path. Then load Photo Paper according to the
instructions in Chapter 2, “Paper Handling.”
Paper path Printable side Remarks
Paper tray Down Paper loading capacity
varies depending on
the media type. See
page 2-5. Put the
support sheet or a
piece of plain paper
under the stack of
paper.
Lower paper tray
Front manual feed slot Down You can load one
sheet at a time.
Rear manual feed slot Up
Note:
❑The paper sizes you can load vary depending on the path. See
page 2-3 for details.
❑Load Photo Paper (4 × 6 inches) with the perforated margins
positioned as shown below.
❑Use flat, undamaged paper. If the paper or the support sheet
is curled, flatten it before loading to avoid paper feeding
problems.
loading position
c-24a
1
R
Keywest Ref. Guide
Rev.c
A5 size Chapter 1
10-09-97 DR, pass 0
Printing on Various Kinds of Paper 1-19