4. When the Operate light stops flashing, click Print nozzle
check pattern in the Head Cleaning dialog box and use
the pattern to confirm that the head is clean and to reset the
cleaning cycle.
Nozzle check pattern:
The above sample is in black and white, but the actual check pattern
prints in color.
In the check pattern, if you find that any segments are missing
from the test lines, as shown below, you may need to repeat the
head cleaning and print the nozzle check pattern again.
If print quality hasn’t improved after repeating this procedure
four or five times, follow the re commendations listed in this
chapter. If the print quality still has not improved, contact your
dealer.
pattern1
pattern2
LKeywest Ref. Guide
Rev.c
A5 size Chapter 8
10-09-97 DR, pass 0
8-38 Troubleshooting