Epson S1C62 Family 2.1.5Alphabetical listing of commands

ICE CONTROL SOFTWARE ICS62XX

2.1.5Alphabetical listing of commands

Tables 2.1.5.1(a) and (b) show an alphabetical listing of ICE commands.

Table 2.1.5.1(a) Alphabetical listing of commands

Item	Command	Description of operation	Reference
number	configuration		page
1	#A,a	Assemble mnemonic instruction and store in address "a"	VIII-38
2	#BA,a	Set break at program address "a"	VIII-52
3	#BAR,a	Cancel breakpoint	VIII-52
4	#BC	Display break condition	VIII-58
5	#BD	Set break condition for RAM data	VIII-53
6	#BDR	Cancels the data RAM break condition	VIII-53
7	#BE	Break enable mode	VIII-66
8	#BM	Assign multiple break condition for program address, RAM data	VIII-56
		and registers
9	#BMR	Cancels the multiple break condition	VIII-56
10	#BR	Break condition set for evaluation board CPU registers	VIII-54
11	#BRR	Cancels the register break condition	VIII-54
12	#BRES	All break conditions canceled	VIII-59
13	#BRKSEL,REM	Sets BA clear/remain modes	VIII-68
14	#BSYN	Break disable mode	VIII-66
15	#BT	Sets break stop/trace mode	VIII-67
16	#CHK	Reports results of ICE self diagnostic tests	VIII-34
17	#CL,file	Loads ICE set condition from file	VIII-73
18	#CS,file	Saves ICE set condition to file	VIII-73
19	#CVD	Indicates coverage information	VIII-36
20	#CVR	Clears coverage information	VIII-36
21	#DD,a1,a2	Displays contents of addresses a1 to a2 in the data area	VIII-24
22	#DP,a1,a2	Displays contents of addresses a1 to a2 in the program area	VIII-22
23	#DR	Displays evaluation board CPU internal registers	VIII-26
24	#DXY	Displays X, Y and MX, MY	VIII-35
25	#FD,a1,a2,d	Sets d to addresses a1 to a2 in the data area	VIII-41
26	#FP,a1,a2,d	Sets d to addresses a1 to a2 in the program area	VIII-40
27	#G,a	Executes the program from the "a" address	VIII-60
28	#H,p1,p2	Displays history data for pointers 1 and 2	VIII-27
29	#HA,a1,a2	Sets up the history information acquisition from program area a1 to a2	VIII-49
30	#HAD	Indicates the history acquisition program area	VIII-49
31	#HAR,a1,a2	Sets up the prohibition of the history information acquisition	VIII-49
		from program area a1 to a2
32	#HB	Displays upstream history data	VIII-30
33	#HC,S/C/E	Sets up the history information acquisition before	VIII-48
		(S), before/after (C) and after (E) the break hit
34	#HELP	Display ICE instructions	VIII-86
35	#HG	Display history data in 21 lines	VIII-30

VIII-6	EPSON	S1C62 FAMILY
		DEVELOPMENT TOOL REFERENCE MANUAL