FUNCTION OPTION GENERATOR FOG62XX

(5)PLEASE INPUT ANY COMMENT

When modifying a comment, enter all the comment lines anew, beginning with the first line; comment data cannot be partially modified. Previously entered comment data can be used by pressing the RETURN key "". The input condition are the same as for new settings.

(6)PLEASE INPUT EDIT NO.?

Enter the number of the function option to be modified, then start setting the option contents.

When selection of one option is complete, the system prompts entry of another function option number. Repeat selection until all options to be modified are selected.

If the "" key is pressed without entering a number, the option of the subsequent number can be selected.

Enter "E" to end option setting. Then, move to the confirmation procedure for HEX file generation (See Section 4.5).

Example: • When modifying the settings of the function option of No. 9

PLEASE INPUT EDIT NO.? 9

• When ending setting

PLEASE INPUT EDIT NO.? E

4.4 Selecting Function Options

Option selection is done interactively. For new settings, set Options 1 to last sequentially; to modify settings, the specified option number may be set directly.

*** OPTION

NO.3 ***

 

 

 

 

--- MULTIPLE KEY ENTRY RESET ---

 

COMBINATION

1. Not Use

 

 

2.

Use

K00,K01

 

 

3.

Use

K00,K01,K02

 

 

4.

Use

K00,K01,K02,K03

PLEASE SELECT NO.(1) ? 2

 

 

 

 

 

 

COMBINATION

2. Use

K00,K01 SELECTED

*** OPTION

NO.4 ***

 

 

 

 

--- INTERRUPT NOISE REJECTOR ---

 

K00-K03

1. Use

 

 

 

2.

Not Use

PLEASE SELECT NO.(1) ? B

 

 

 

 

 

 

 

 

 

 

 

 

*** OPTION

NO.3 ***

 

 

 

 

--- MULTIPLE KEY ENTRY RESET ---

 

COMBINATION

1. Not Use

 

 

2.

Use

K00,K01

 

 

3.

Use

K00,K01,K02

 

 

4.

Use

K00,K01,K02,K03

The selections for each option correspond one to one to the option list. While referring to the contents recorded in the option list, enter the selection number.

In the message that prompts entry, the value in parentheses ( ) indicates the default value in case of new settings, or the previously set value in case of setting modification. This value is set when only the RETURN key " " is pressed.

In return, the confirmation is displayed.

When you wish to modify previously set function options in the new setting process, enter "B " to return 1 step back to the previous function option setting operation.

When function option setting is completed, move to the confirmation procedure for HEX file generation (See Section 4.5).

PLEASE SELECT NO.(1) ?

V-6

EPSON

S1C62 FAMILY

 

 

DEVELOPMENT TOOL REFERENCE MANUAL