Epson S1C62 Family BD, BDR, SET/RESET BREAK DATA CONDITION BD, BDR, #BD, -:5, R/W, #BD, R/W, #BD, #BDR, DATA, DATA, * :W, #BDR, Format, Function, 5 :1*1*B, ADDR 074:, ADDR ---:

ICE CONTROL SOFTWARE ICS62XX

SET/RESET BREAK DATA CONDITION BD, BDR

Format

Function

#BD (With guidance)

#BDR

Break condition set for data RAM read/write area.

(1) BD: Break condition set for RAM data address, data, and R/W. Address can be set at one point, data set from addresses 0 to F or masked, and the R/W area set to read, write, or masked. A break is generated when the three conditions specified by address, data, and R/W coincide.

(2)BDR: Cancels the condition set by BD command.

(3)A break condition set by the BD command is functional at one point only, but can be mixed with BA and BR commands.

(4)A BD condition can be canceled by executing the BM command.

Examples #BD					... A hyphen (-) is displayed when the BD condition is absent
		ADDR ---:074
		DATA	-:5			At address 74, the number 5 is entered as data and the R/W
		R/W	-:*			is masked (*)
	In the above example, a break is set for when the number 5 is written to or read from the data RAM
	address 074.
	#BD					When no setting modification is made, hitting the	key
		ADDR 074:		...
						continues the operation to the next setting
		DATA	5 :1*1*B		...	Data is masked
		R/W	* :W	...		Sets the R/W function to write

At the current settings, a break is generated when 1 is written to 23 bit and 21 bit at data RAM address 74.

#BDR	...		All BD conditions are cleared
#BD			Entering	after canceling BD setting confirms cancellation
ADDR ---:		...

#

S1C62 FAMILY	EPSON	VIII-53
DEVELOPMENT TOOL REFERENCE MANUAL