Epson S1C62 Family 4.5 End Procedure, 4.4 HEX File Generation and EPROM Selection

SEGMENT OPTION GENERATOR SOG62XX

4.4 HEX File Generation and EPROM Selection

When input file selection is completed, the following message is output to ask the operator whether to generate the HEX file.

END OF	OPTION SETTING.
DO YOU	MAKE HEX FILE (Y/N) ? Y	. . (1)

*** OPTION EPROM SELECT MENU ***

1.27C64

2.27C128

3.27C256

4.27C512

PLEASE SELECT NO.? 2		. . (2)
2. 27C128	SELECTED

(1)DO YOU MAKE HEX FILE (Y/N)?

When debugging the program with evaluation board, HEX file C2XXYYYS.HEX is needed, so enter "Y". If "N" is entered, no HEX file is generated and only document file C2XXYYYS.DOC is generated. However, when H option is used, HEX file is generated without any conditions. Therefore, this menu is not displayed.

(2)PLEASE SELECT NO.?

For the option ROM selection menu displayed when "Y" is entered in Step (1), select the EPROM to be used for setting evaluation board options. This menu is not displayed when "N" is entered in Step (1). "27C128" is selected in the above example.

When the above operation is completed, SOG62XX generates files. If no error is committed while setting segment options, the following message is output and the SOG62XX program will be terminated.

MAKING FILE IS COMPLETED.

Note The EPROM to be mounted on the evaluation board must satisfy the following conditions: EPROM for setting segment option:Tacc ≤ 170 ns (Tacc: Access time)

4.5 End Procedure

When a series of operations are complete, the SOG62XX program will be terminated.

SOG62XX can be forcibly terminated by pressing the "CTRL" and "C" keys together during program execution. (It is possible by pressing "STOP" key depending on the PC used.)

VI-8	EPSON	S1C62 FAMILY
		DEVELOPMENT TOOL REFERENCE MANUAL