110 Printing with Epson Drivers for Windows

Normal cut

Double cut

Single cut

7.Choose one of the following Auto Cut settings (for borderless printing):

•Off disables automatic cutting. Choose this setting if you want to operate the cutter manually, use the auto take-up reel, or print on heavy media that must be cut by hand. See page 60 for instructions on operating the cutter manually.

•Single Cut causes the images to be printed end-to-end and saves paper (when you are printing multiple images). With borderless printing, you may see a sliver of the previous or next image. You will see a white margin between print jobs.

•Normal Cut allows margin space at the top and bottom of each image.

•Double Cut extends the space between images and trims each print individually. This provides the cleanest edge for borderless printing.

8.Select these additional roll paper options if necessary:

•Auto Rotate saves paper if your document length is shorter than the printable width of the roll. The document is automatically rotated 90 degrees and printed crosswise. Be sure to click Roll Width and select the width of your roll paper.

•Print Page Line prints trim lines on the right and bottom edges of your pages.

9.When you’re finished, click OK.

Borderless Printing

For true borderless printing on roll paper, you can select either Auto Expand or Retain Size and create a custom paper size, as described on page 109. Your image may be clipped on the left and right edges, but you can minimize clipping by sizing your image according to the page width and by adjusting the length.

For either setting, you should add 0.1 inch to the length of your custom size.

The Auto Expand setting provides the best solution for borderless printing with minimal image clipping. Using this setting and the Retain Size setting, you can create a custom paper width equal to the width of the roll media.