Note: The print head nozzles may dry out while you replace the cutter blade, so make sure you run a nozzle check after you are finished. See page 130 for instructions.

Maintaining and Transporting the Printer 141

2. Push down on the side pin while turning the latch to the left.

3. Close the front cover. The cutter moves to the home (far right) position.

Replacing the Maintenance Tanks

The maintenance tanks store ink that gets flushed from the system during the initial ink charge and manual and automatic print head cleaning. The three maintenance tanks are located on the back of the printer as shown:

Left tank

Center tank

Right tank