70 Handling Paper and Other Media

Note: For heavy paper, you may need to increase the suction by pressing the u button. This helps hold the paper in place during loading and printing.

For lightweight paper, decrease the suction by pressing the d button.

Caution: To avoid damaging the printer, never move the paper lever during printing, or while the Pause light is flashing.

4.Feed the sheet into the paper slot. Make sure the right and bottom edges of the paper are straight and aligned with the horizontal and vertical lines on the printer.

5. Push the paper lever back to the secured position.

6.Press the Pause button. The sheet feeds into printing position automatically.

7.When you see a question on the display about the type of media you want to use, select Yes if the media is correct, or select No, then change the setting and press .

8.Print your page. After it is finished, the sheet stays in the printer.

9.To remove your print, press the d button or release the paper lever while holding the printed sheet.