Handling Paper and Other Media 65

4.Press d to feed the paper.

5.Pull the paper around the back of the take-up reel core and use three pieces of tape to attach the paper to the core.

6.Press d to feed the paper and create some slack.

7.Hold down the Auto Backward button on the control panel to rotate the take-up reel and wind a small length of paper. Make sure there is enough slack between the paper and the take-up reel core.

8.When you’re ready to print, make sure Auto Cut is set to Off in the printer driver.

9.Press the Auto Backward button on the control panel, then send your print job to the printer.