Caution: Don’t turn off the printer while the firmware is updating.

Note: After you install the software, you need to load paper and print a test image. If the print quality is satisfactory, your setup is done. If not, you may need to align the print head, as described on page 132.

Setting Up the Printer 45

You see the Firmware Updater window.

5.Make sure your printer is on, its LCD displays Ready, and it is connected to your computer or network, then choose your printer.

6.Click Browse and find the firmware file that you just downloaded and extracted. Select the file and click Choose.

7.If the firmware version of the file is newer, click Update to start the firmware updating process. (If it is the same, you don’t need to update.)

8.When the update is complete, close the Firmware Updater window and Epson LFP Remote window.

If you have not already done so, follow the instructions in the next section to configure the printer for your network.