EPN3600
Tracking Duration: User can set tracking duration at ○8 . Available setting
range is 0~600 second. Selecting “0” will turn off tracking duration. When tracking duration is up, the system will go back to start point.
Note: if user did not set up a start point or start point is disabled, the system will go back to tracking initial point instead of start point.
○9: User can set tracking mode when the object is lost on screen here. Three
available options are:
“Keep tracking” - when tracking object is lost, the system will keep waiting another tracking object at the same position without changing zoom ratio. “Zoom out and look for a new object”- when tracking object is lost, the system will zoom out immediately and looking for a new tracking object. “Stop tracking and zoom out”- when tracking object is lost, the system will stop tracking and zoom out.
User can set desired duration for above three options. Available range is 0~600 second. Selecting “0” will turn off above three options, which means the system will go back to start point immediate when tracking object is lost.
Note: if user did not set up a start point or start point is disabled, the system will go back to tracking initial point instead of start point.
Resume from Manual Stop 10○: Set time of “Resume from Manual Stop”. User
may manually operate PTZ function of this camera when auto tracking function is on. When manual operation ceases, the system will resume to “auto tracking start point” after this time. Available setting range is 0 ~ 600 second. Selecting “0” will turn off this “resume from manual stop” function.
Sensitivity: User can set sensitivity level of
options are low, middle and high.
39
