EPN3600
are:
•IP setting
•DDNS setting
Default: The Default button should be used with caution. Pressing this button will return all of the camera's settings, including the IP address, to the factory default values. The camera will then have to be
Save/Load Configuration Server
To take a backup of all of the configurations, press Save to save all configurations to a config. file. If necessary, it is then possible to return to the previous settings if the settings are changed and there is unexpected behavior.
Press the Browse button to locate the saved config. file (see above) and then click the Load button. The settings will be restored to the previous configuration.
Upgrade Firmware
Upgrade the EPN2700/3100/3600 with the latest firmware. Press Browse button to search firmware file. Press Upgrade upgrade the firmware.
button to
Note 1: Do not disconnect power to the unit during the upgrade. The unit reboots automatically after the upgrade has completed.
2. During upgrading process, all event recording actions will be stopped. It will continue to record after the camera is rebooted.
81
