EverFocus EPN3600 instruction

EPN3600

Figure 2-26 Video – Camera –Set Pattern - Recording Tour Seconds

3.Use “Arrow” buttons, “Zoom In/ OUT”, “Focus Far/Near”, “IRIS +/-“ buttons and “PT Speed” option to operate camera on a desired pattern

4.After completing pattern operations, click “Complete” button to save this pattern tour. At this time, the live screen will show “Saving Pattern….”. User can also click “Clear” button to clear a pattern or click “Go” to run and see a preset pattern on live screen.

Note: To stop running pattern, click on live screen once.

Auto Resume: Return to previous mode, if no action for a period of time. Available options of Auto Resume are OFF, After 1 M (minute), after 5 M, After 10 M, After 30 M and After 60 M. After this period of time, speed dome will resume to the mode you set in “Resume To”. By selecting OFF, this function will be disabled.

Resume To: Select “Resume To” mode for “Auto Resume” function. Available options are POS.1 (H), TOUR1, PAT.1, AUTOPAN and PREV.MODE.

Power Up Func.: Select the mode where the system will return to when power failure occurs. Available options of this field are OFF, POS.1 (H), TOUR1, PAT.1, AUTOPAN and PREV.MODE.

Auto Flip: Select ON to enable Auto Flip function or select OFF to disable this function.

46

Image 46

EverFocus EPN3600 user manual Video Camera -Set Pattern Recording Tour Seconds

Contents

User’s Manual EPN3600 Safety Notice About this document Terms and Trademark Support Table of Contents 2.3.2 Feature Introduction EPN3600 Accessing the Camera Menu Default page of Camera Menu View Size Video StreamRecord ~ 10 Play Audio/Transmit Audio SnapshotPTZ Control PTZ Control Window EPN3600 Select Object Number button, Go button and Clear buttonAuto Tracking -ON/OFF Manual Control Trigger Event signals Manual Control ResetStatus Display System Info Information 2 Log System Info Information User Config Text Setting Recording/Snapshot Export Setting Date/Time Format Used in Text Network Network Setting- Network Network EPN3600 Ddns setting Ddns Bandwidth Setting Bandwidth SMTP/FTP Set Smtp Set FTP Set Network Alarm Network Alarm reserved for PowerConVideo Stream Setting Multi Streaming Video Recording Setting Camera Position Settings Set Preset Auto Mode Settings Set Auto Tracking How to set Auto Tracking Start point 13 Video Camera -Auto Tracking Window Set Pan/ Tilt Limits Set Pan Range 16 Pan Range Setting Right Limit Setting Set Tilt Range 17 Tilt Range Setting Down Limit Setting Clear Pan/ Clear Tilt Set tracking mask 20 Tracking Mask Size Window EPN3600 EPN3600 Set Object Size 22 Set Object Size Max/Min frame Also click Reset button to make options to default values How to set Auto Pan Set Auto Pan EPN3600 Set Tour 24 Video Camera -Tour Window Set Pattern 25 Video Camera -Pattern Window 26 Video Camera -Set Pattern Recording Tour Seconds PTZ OSD Settings General Operation Guide of PTZ OSD Setting Button/ button Video Settings Exposure Iris Mode Focus Mode 30 Video Settings Focus Mode Digital Zoom White Balance Backlight 2.3.1.6 Day/Night 34 PTZ Video Settings Day/Night Color Negative Wide Dynamic Range 2.3.2 OSD/AREAS Areas 40 OSD/AREAS menu- Areas Sub-menu 41 Areas setting Left Position Setting Window 43 Areas setting Directions Set North Default NorthDisplay Show OSD Zones How to set private zone Private Zones To adjust the size of private zone, use following buttons Info 53 Private Zone Zone Color Audio Exit Audio 56 Audio User 57 User Event Schedule Event Press Button to add an event condition Example 1 Manual trigger-Upload to FTP Example 2 Alarm input Go to PTZ Preset with Auto-Tracking EPN3600 Motion 59 Event Event Tab Alarm 60 Event Alarm Tab Time Mask 61 Event Time Mask System Date/Time EPN3600 Daylight Saving 63 System Daylight Saving Maintenance 64 System Maintenance EPN3600 65 EKB200 setting EKB200 66 EKB200 Panel EPN3600 Specifications Audio Network / Interface EverFocus