EverFocus EPN3600 user manual Set FTP

EPN3600

Password: Input the password if the SMTP server requires authentication.

Receiver Address: Input the e-mail address for receiving e-mail message when the EVENT is enabled and triggered. Please use “;” to separate addresses.

Sender Address: Input sender’s e-mail address, so that receiver can recognize the sender when an event message is sent out.

Send Test Mail: Click button to send a testing mail to the assigned address.

Set FTP

The settings relating to the FTP server used to transmit the alarm images can be configured here.

FTP Server: Enter the IP address or the host name of the FTP server.

FTP Port: Enter the port number for FTP server. Default is 21.

Recording Path: Assign the recording path.

User Name: Set FTP User’s name.

Password: Set FTP password.

PASV mode: Check to enable Passive mode. Normally enable Passive mode. When failed to establish the connection, uncheck "PASV" mode.

Test FTP Server: Click button to send a testing file to the assigned FTP server.

Click Apply to apply the setting changes or Reset to reset without saving the change.

26