Extron electronic 3000B Also Available From Exatron:

Exatron 3000B

www.exatron.com 1-5 Chapter 1 Introduction

with One Elevated Temperature Track

The Model 3010B Hot Rail adds a single track hot rail to the input of the handler. This track holds twenty

inches of devices in order to preheat them prior to test. The temperature range of the Hot Rail is ambient

to +125° C. AC heaters are located within the Hot Rail. Exceptional temperature control is maintained by

constantly monitoring four points in the Rail and four points in the Test Site. The guaranteed accuracy is

±3° C everywhere in the Soak Rail and ±2° C in the Test Site. All four "zones" in the hot rail are controlled

by an EXATRON-designed computerized temperature controller.

The input of the Hot Rail has a manually operated two-input tube holder assembly.

All Model 3010B Handlers are supplied with a Free Rolling EXATRON Dolly ("FRED.") For operation, the

handler is to be mounted onto this floor stand which has four large tires for easy positioning and four floor

jacks to lock it into place.

Also Available From Exatron:

with Two-Tube Manual Input

The Model 2000B is an ambient handler with a manually operated two-input tube holder assembly for low

to mid-volume handling applications. The tube holder must be manually shifted when one tube of devices

empties in order to present another tube of devices to the input track. The Model 2000B uses Snap On

Change Over Kits to accommodate various size packages. The tube holders are custom-machined to a

specific tube size and are included as standard equipment with Model 2000B Snap On Change Over Kits.

All Model 2000B Handlers are supplied with bench-top base plates which must be bolted directly to a

bench or table top to secure the handler. Although smaller and less expensive than our Model 3000B, the

2000B Series handlers are equipped with a broad range of features found in all EXATRON handlers

including:

• Wide Variety of Device Handling Capability

• Quick Changeovers Using Modified Snap-On Change Kits

• Variety of Interfaces

• Positive Binning

• Plunge to Board Test Contact Mechanism

• ESD Safeguards

Series of Production Handling Systems

The 5000 Series of production handlers integrate any combination of customer-specified ambient

temperature programming/test sites, hot chamber(s), elevated temperature test site(s) and a "s mart" laser

marking system. In addition, automatic tube loader/reloader components from various manufac turers may

be integrated into EXATRON'S Model 5000 when the laser marking system option is specified.

When equipped with a laser marker, the entire system is controlled by a single 80486/33 computer.

One or more test sites are available on all of the various Model 5000 configurations. The EXATRON

Model 5000 Series of Heavy-Duty Handling Systems are ideal for automating high-volume program, test,

and mark applications.