Exatron 3000B
www.exatron.com 2-12 Chapter 2 Installation
Powering Up, Running Diagnostics
You may find it beneficial to contact your local Exatron Representative to assist you in setting up your
handler. If you prefer, please feel free to call the Exatron Customer Service Department for assistance as
needed during set up. Our toll-free telephone number is 1-800-EXA-TRON.
After you have unpacked and assembled the handler according to the instructions shown above,
review this entire user's manual before proceeding.
1. Bolt your "benchtop" Model 3000B handler securely to your workbench. If your Model 3000B handler
is mounted on a FRED, verify that it is secure; double-check all mounting bolts.
2. Compare your purchase order to the handler's packing slip and verify that all items ordered have been
received.
3. If your application requires compressed air, bolt the black Wilkerson air regulator, part #NCOD440
onto the right side of the 3000B frame, using two #10-32 x 5/8" bolts. With the orange switch in the
closed position, attach the nozzle of your clean, dry, compressed air supply to the air regulator.
WILKERSON AIR REGULATOR – OFF POSITION
Main Air Flow On/Off
Switch
(On Position Shown)