Extron electronic 3200s manual ReferenceInformation,c t’d, Matrix 3200/6400 Series Part Numbers

ReferenceInformation,c t’d

Matrix 3200/6400 Series Part Numbers

Part Numbers for Matrix 3200/6400 switchers use the following format:

60-25x-iofr

where: x = 0 = Matrix 6400 Wideband x = 1 = Matrix 3200 Wideband x = 2 = Matrix 6400 Video

x = 3 = Matrix 3200 Video

x = 4 = Matrix 6400 Sync

x = 5 = Matrix 3200 Sync

x = 6 = Matrix 6400 Audio

io = Inputs/Outputs (Matrix size). The i and the o are replaced by two characters which identify the exact size of the Matrix.

f = Front Panel Controller (FPC-1000)

f = 0 = No, f = 1 = Yes

r = Redundant Power Supply

r = 0 = No, r = 1 = Yes

An example of a typical Matrix 3200/6400 part number is:	60-250-HD11
In this example: x = 0 = Matrix 6400 Wideband

io = HD = 64x32 which was obtained from the Matrix 6400 Wideband Part Number Table on Page A-3 as illustrated below. The vertical column identifies i (# of Inputs) and the horizontal row identifies o (# of Outputs).

f = 1 = yes = Front Panel Controller

r = 1 = yes = Redundant Power Supply

1632 48 64

8 AA BA CA DA

16AB BB CB DB 24 BC DC FC HC

32BD DD FD HD

40CE FE LE

48CF FF LF

56DGHG LG PG

64DH HH LH PH

For the example above, the io characters would be BA for matrix size 32x8, DD for matrix size 32x32 and PH for matrix size 64x64.

The Matrix 3200 Wideband and Matrix 6400 Audio io characters are selected using the same procedure as is used with the Matrix 6400 Wideband, but with different tables as shown on Page A-3.

The io characters for the Matrix 3200 Sync part number are DD as it is only available in one matrix size, 32x32. The io characters for the Matrix 6400 Sync part numbers are PH as it is also available in only one matrix size, 64x64. Either of the two Sync part numbers may include r = 0 or 1 but f must be 0 as a Sync module cannot have a Front Panel Controller.

Matrix 3200/6400 Part Numbers (with matrix tables) are shown on Page A-3.

A-2 Matrix 3200/6400 Series • Reference Information