Extron electronic 3200s manual Matrix 6400 Audio Switcher Upgrade Changing the Matrix Size

Upgrades and Troubleshooting, cont’d

Matrix 6400 Audio Switcher Upgrade - Changing the Matrix Size

Changing the matrix size of a Matrix 6400 Audio Switcher may require adding or removing input and/or output audio circuit cards. Page 5-9 describes the procedure for determining the required number of input and output cards for the desired matrix size and which connectors the cards should be plugged into. The following procedure describes how to change the matrix size.

1.See Page 5-12 “Software Procedure - Before and After a Hardware Upgrade”. Do steps under “Before Hardware Changes” prior to making any hardware changes.

To ignore step 1 and proceed with the hardware upgrade will require considerable system reconfiguration time. It is highly recommended that you not skip any step.

2.Turn OFF the AC power switch and unplug the AC power cord.

Installing or removing Audio cards with power on may damage the equipment.

3.Plug the audio cards in as required (see page 5-9).

4.Plug the AC power cord in and turn ON the AC power switch.

5.Do the steps under “After Hardware Changes” on Page 5-13.

6.Verify that the new matrix size is correctly identified by the software.

A BME

B

C4

D		ADDRESS
E	COMM.
A
B
C	MKP
D
E
		MADEANAHEIM,	CA
		IN
			USA
IN

IN
IN	INPUTS
IN
	IN
	IN
	IN
	IN

OUT			BMECOMM.
AC	PO
F
USE: WER		INP
	250
	V	5	UT
		.0A
			TT
			50/60Hz	BEFORE SERVICING
			MAX	CORD
	IN			POWER

-56

OUT OUT OUT

57-64 1-8

9-16 17-24

OUTPUTS

OUT

OUT OUT OUT OUT

25-32 33-40 41-48

Align with plastic guides

49-56 57-64

Figure 5-7.A Inserting an audio card into slot 57-64.

5-8 Matrix 3200/6400 Series • Upgrades and Troubleshooting