Extron electronic MVP 104GX manual Balanced audio, Fastening captive screws

Installation, cont’d

Balanced audio

1. Attach the audio cable to a balanced speaker input connector (tip, ring, and sleeve), as shown here.

Tip (+) Sleeve

Ring (-)

Tip (+)

Sleeve (ground)

2. Attach the other end of the audio cable to the audio cable connector (Extron part number 10-319-10). Fasten the captive screws inside the audio cable connector as shown in figure 2-4.

Balanced Audio

Tip

Ring

Sleeve (s)

Tip

Ring

Connect the sleeve(s) to ground (GND). Connecting the sleeve(s) to a negative (-) terminal will damage audio output circuits.

3. Slide the audio cable connector into the audio connector of the MVP 104GX, and plug the speaker end of the audio cable into the speakers.

Figure 2-4 — Fastening captive screws

2-6 MVP 104GX Installation