![Inserting the telescopic rack and trays:](/images/new-backgrounds/73600/7360035x1.webp)
Inserting the telescopic rack and trays:
1.Insert the Telescopic Rack onto the side slots as far as it will go; you will have to raise it slightly to set it properly past the catches. Bear in mind that the round pegs should be facing the back of the oven.
2.Next, extend the telescopic runners as far as they will go.
3.Position a tray on the runners as shown.
If you wish you may also insert the grill on top of the combination of the telescopic rack and tray, but with the catches facing upwards.
4.Slide the rack and trays inside the oven completely.
Removing the trays from inside the oven:
Once cooking has been completed, slide the telescopic rack out, you can then do one of two things, as required:
a.Remove the tray from the telescopic rack completely.
b.Remove both the tray and telescopic rack. To do so, you will have to lift the “Telescopic Rack” slightly to get past the catches that prevent it from tipping over.
Remember that the “Telescopic Rack” set of tray and/or grill with its
18