To set the Timer:
1.Press the button several times 
until the 
symbol starts flashing.
2.Set the countdown time by pressing the 
or 
buttons.
Example: I want the timer to signal in 45 minutes. After a few seconds, the function will be activated, the 
symbol will remain lit and the screen will go back to its previous situation.
Once the time set has elapsed, the oven will start to beep for 60 seconds while
the symbol 
flashes. After this time, the oven will stop beeping but the 
symbol will continue to flash. Press any button to stop it flashing.
If you wish to stop the beeping before the 60 seconds are up, press any button.
WARNING: If the oven is working, remember that the beeper function does not stop it operating. Therefore, if you wish to stop cooking, do not forget to turn the function selector and the temperature selector to the “0”position.
To change the countdown time, follow the procedure described for setting the timer.
To cancel the timer:
1.Press the 
button several times until the 
symbol starts flashing.
2.Press the 
button until the time displayed on the screen is “0:00”.After a few seconds the 
symbol will go off and the screen will go back to its previous situation. The beeper function will have been cancelled.
37
