Fluke 90100 manual Theory of Operation, Maintenance and Service, Customization

Section 3: Theory of Operation		3-1
3.1	Introduction	3-1
3.2	Overall Function Description Of The Model 35360A TRACKER Display	3-1
3.2.1	Power Supply	3-2
3.2.2	300 Volt Electronic Bias Supply	3-3
3.2.3	Front Panel Switches	3-3
3.2.4	Processor	3-3
3.2.5	VFD Display	3-3
3.2.6	Serial Communications Port	3-4
3.2.7	Electrometer	3-4
3.2.8	Multiplexer and A/D Converter	3-4
3.3	Model 35300A Ion Chamber Detectors	3-5
3.4	Air Density Corrections	3-5
3.5	Basic Operating Equations	3-6
3.5.1	Charge	3-6
3.5.2	Current	3-6
3.5.3	Absolute Dose	3-6
3.5.4	Absolute Dose Rate	3-6
3.5.5	Percent-of-Center	3-6
3.6	Basic Operating Quantities	3-7

Section 4: Maintenance and Service		4-1
4.1	Introduction	4-1
4.2	Troubleshooting	4-2
4.3	Line Fuse Replacement	4-7
4.4	Interface Connector Cleaning	4-9
4.5	Cleaning The Instrument	4-9
4.6	Replaceable Parts Information	4-9
4.7	Recalibration & Repair Information/Technical Assistance	4-10

Section 5: Customization		5-1
5.1	Introduction	5-1
5.2	Make A Working Disk	5-2
5.3	Connection To The Computer	5-2
5.4	Starting The Customization Software	5-2
5.5	Screen Formats	5-2
5.6	Definitions	5-5
5.7	Setting The Electrometer Gains And Offsets	5-6
5.8	Usage Examples	5-8
5.9	Errors	5-10

Appendix A: Using Build-Up		A-1
A-1	Build-Up, Peg, And Retainer Kit Options	A-1

ii