Model 90100
Operators Manual
Low Battery Indication at the Display
WARNING
The Model 35360A TRACKER Display and 35300A Detector contain no internal operator serviceable
Disassembly of either unit could result in electrical h k
Always turn the 35360A TRACKER Display's power off
prior to connecting or disconnecting the interface bl
Failure to do so may result in an electrical h k
When powering the 35360A TRACKER Display from
an AC line, always use a
as the one supplied with the 90100 TRACKER System. In addition, only connect the 35360A TRACKER Display to
AC power outlet employing a third wire safety d
Low Battery annuciator is displayed on 35360A TRACKER Display's VFD.
Yes | Operating from | No |
| AC power source? |
|
Connect 35360A TRACKER Display to an AC power source and press the POWER key.
No | Low battery | Yes |
| annuciator displayed? |
|
Commence operation from AC line
power or charge batteries.
Verify voltage present at AC line receptical by connecting and powering some other device.
Yes | AC line voltage present? | No |
|
|
Check AC line fuses at rear panel of 35360A TRACKER Display.
No
Fuses OK?
Replace 35360A TRACKER
Display's AC line fuses.
Refer to Section 5.3.
Yes
35360A TRACKER Display is faulty and will require repair or replacement.
