User’s Guide – version 3.1.3 | NetFlow Tracker |
dstappl – specifies an acceptable destination IP application. Format as for srcappl above.
dstappl_exclude=true – specifies that the supplied destination applications are excluded rather than included.
appl – specifies an acceptable source or destination IP application. Format as for srcappl above.
appl_exclude=true – specifies that the supplied source or destination applications are excluded rather than included.
recappl – specifies an acceptable recognised IP application. Format as for srcappl above.
recappl_exclude=true – specifies that the supplied recognised applications are excluded rather than included.
applid – specifies an acceptable identified application.
<name> | The identified application name; see Device Settings for more |
| information |
<id> | The identified application identifier |
applid_exclude=true – specifies that the supplied identified applications are excluded rather than included.
tos – specifies an acceptable
<prec> | The precedence, in the range |
<tos> | A string of letters indicating which ToS bits must be set or |
| unset, each letter being one of D, T, R or M for low delay, high |
| throughput, high reliability and minimise monetary cost |
| respectively, or d, t, r or m for normal delay, normal |
| throughput, normal reliability and normal monetary cost; any |
| bits not specified as set or unset will be disregarded |
<prec>%20<tos> | The precedence and ToS as above; %20 being a |
| space character |
tos_exclude=true – specifies that the supplied
51
