User’s Guide – version 3.1.3

NetFlow Tracker

mls flow ip interface-full mls nde interface

or

mls flow ip full

If you have a Supervisor Engine 2 or 720 running IOS version 12.1.13(E) or higher the first two commands are required to put interface and routing information into the NetFlow Exports. This information is unavailable with any earlier IOS version on the Supervisor Engine 2 or 720.

If you have a Supervisor Engine 1 the third command is required to put full information into the NetFlow Exports.

ip flow ingress layer2-switched vlan <vlanlist> ip flow export layer2-switched vlan <vlanlist>

A PFC3B or PFC3BXL running 12.2(18)SXE or higher is required for this command, which enables NDE for all traffic within the specified VLANs rather than just inter-VLAN traffic.

77

Page 77
Image 77
Fluke Recording Equipment manual User’s Guide version NetFlow Tracker