Fluke Recording Equipment manual Name, Port/name, Port/number

User’s Guide – version 3.1.3 NetFlow Tracker

invpn – specifies a VPN that the input interface must be part of.

<name>	The VPN name; see Device Settings for more information
<id>	The VPN identifier

outvpn – specifies a VPN that the output interface must be part of. Format as for invpn above.

vpn – specifies a VPN that either interface must be part of. Format as for invpn above.

srcaddr – specifies an acceptable source address.

<addr>

The address in dotted-decimal format

srcaddr_exclude=true – specifies that the supplied source addresses are excluded rather than included.

dstaddr – specifies an acceptable destination address. Format as for srcaddr above.

dstaddr_exclude=true – specifies that the supplied destination addresses are excluded rather than included.

addr – specifies an acceptable source or destination address. Format as for srcaddr above.

addr_exclude=true – specifies that the supplied source or destination addresses are excluded rather than included.

proto – specifies an acceptable IP protocol.

<name>	The protocol name, such as TCP or UDP
<number>	The protocol number, in the range 0-255

proto_exclude=true – specifies that the supplied protocols are excluded rather than included.

srcappl – specifies an acceptable source IP application.

<port>/<name>	The application, with port being the application port number
	in the range 0-65535and name being the protocol name,
	such as TCP or UDP
<port>/<number>	The application, with port being the application port number
	in the range 0-65535and num being the protocol number in
	the range 0-255
<name>	The name of a grouped application

srcappl_exclude=true – specifies that the supplied source applications are excluded rather than included.

50