Fluke Recording Equipment manual Code, Byte, Addr/mask

User’s Guide – version 3.1.3 NetFlow Tracker

ds – specifies an acceptable differentiated service codepoint.

<name>	The assigned name of the codepoint
<code>	The six-digit binary representation of the codepoint
<byte>	The value of the entire Type-of-Service byte, in the range 0-255

ds_exclude=true – specifies that the supplied differentiated service codepoints are excluded rather than included.

class – specifies an acceptable traffic class.

<name>	The traffic class name; see Device Settings for more information
<id>	The traffic class identifier

class_exclude=true – specifies that the supplied traffic classes are excluded rather than included.

srcas – specifies an acceptable source autonomous system number.

<as>

The AS number, in the range 0-65535

srcas_exclude=true – specifies that the supplied source autonomous system numbers are excluded rather than included.

dstas – specifies an acceptable destination autonomous system number. Format as for srcas above.

dstas_exclude=true – specifies that the supplied destination autonomous system numbers are excluded rather than included.

as – specifies an acceptable source or destination autonomous system number. Format as for srcas above.

as_exclude=true – specifies that the supplied source or destination autonomous system numbers are excluded rather than included.

srcnet – specifies an acceptable source subnet. Note that the subnet mask supplied by the router is ignored.

<addr>/<mask>

The subnet, with addr being the network address in dotted- decimal format and mask being the mask length, in the range 0-32

srcnet_exclude=true – specifies that the supplied source subnets are excluded rather than included.

52