Frymaster CFD Decathlon Series Gas Fryers, Service Procedures, 1.7.8Replacing the Frypot cont

DECATHLON SERIES GAS FRYERS

CHAPTER 1: SERVICE PROCEDURES

1.7.8Replacing the Frypot (cont.)

31.Using a sharp knife or box-cutter, cut the silicon seal between and in front of the two frypots (two-vat or more). Use care not to scratch stainless steel surfaces.

Cutting frypot seal prior to frypot removal.

32.Remove frypot from fryer by lifting up and out.

33.Position the frypot upside down on a suitable work surface.

34.Record position of the valve stem in relation to the frypot prior to removing the drain valve. If equipped, remove microswitches and mounting hardware from valve prior to removal. Using a suitable wrench, remove the drain valve from the frypot. Use Loctite PST567 sealant when installing drain valve on replacement frypot.

35.Reverse the above steps to install the replacement frypot.

Lifting frypot from fryer.

Removing drain valve from frypot.

1-30