DECATHLON SERIES GAS FRYERS
CHAPTER 1: SERVICE PROCEDURES
1.7.8 Replacing the Frypot (cont.)
6.Carefully pry the capping strip off with a screwdriver or similar tool and set aside. Be careful not to bend the capping strip during removal.
Removing capping strip.
7.Locate all screws securing back panels. Screw location and orientation will vary according to fryer model.
Typical screw locations on the back
8.Remove back panels on fryer. Retain screws for re- assembly.
9.Remove screw securing brace (and back panel) to flue cap. Support brace with hand while removing screw
to prevent brace from falling away. Remove brace and set aside for reassembly.
Removing brace holding back panel to flue cap.
