FujiFilm iX-100 user manual SmartMedia Status, Power Save Function, P o i n t, Data

SmartMedia Status

LCDDescription

yA SmartMedia card is loaded. A SmartMedia is write-protected.

✽If the beep tone is switched on (/P.33, 45), the camera emits a beep.

	If you load a SmartMedia into your
P o i n t	camera correctly and the “y” icon does
	not appear, wipe the contact area (gold-
P	colored section) of the SmartMedia with
	a soft dry cloth and then reload the
	SmartMedia.

Power Save Function	Camera
the camera off to avoid wasting battery power
The Power Save function automatically switches
when the camera is left unused for a set period
while switched on.
✽ The Power Save function does not operate
when a USB connection is being used.	TV
h To ready the camera for taking pictures after the
Power Save function has been activated, press
the k Power button.
h You can change the period of time after which
the Power Save function is activated. To
change the setting, connect the camera to a TV
(/P.36) and use the Setting menu (/P.45).	Software
■ Settings: Approx. 30 seconds/45 seconds/
60 seconds (factory default)/90 seconds/off
	Data
	19