FujiFilm iX-100 user manual

	Problem			Cause	Remedy
The image is blurred.				h The camera or subject was moving when	h Use the tripod, or set to the flash mode.
				the shot was taken.
				h You photographed a distant subject with	h Set the shooting distance selector
				the p close-up mode.	switch to j normal mode.
Images of subjects shot				h The flash fired in close-up photography.	h Set to the s flash-off mode.
in close-up mode are too
bright.
Nothing happens when				h Camera malfunctions.	h Remove the batteries, re-insert them
you	use	the camera			and try again.
buttons and switch.				h The batteries are exhausted.	h Replace the new alkaline batteries.
There is no picture on TV				h The TV input is incorrect.	h Set to TV input to “video”.
I cannot		format	the	h The SmartMedia is write-protected.	h Remove the write-protection (Peel off
SmartMedia.					the write-protect sticker).
The	PC	does	not	h Connect the camera to the PC with the	h Connect the camera to the PC with the
recognize the camera.				USB cable before installing the software.	USB cable and select [My Computer] /
					[Control Panel] / [System] / [Device
					Manager]. In the Device Manager
					window, delete [Composite USB device]
					or [Unknown device] in [Other devices].
					Then disconnect the camera and install
					the software before reconnecting the
					camera to the PC.
					h Connect the camera directly to the PC
					using the USB cable, not via a USB
					hub.
					h Disconnect the other USB devices
					conneted to the PC.

70