Settings
This screen allows you to set parameters that cannot be set using the “2” mode on the camera (/P.32), including the slide show display mode and the power save function settings.
Camera
Power off | Move to top of menu | Execute/ |
| Select | |
| Confirm | |
|
|
Parameter
Slide show mode
Slide show duration (seconds)
Time out (seconds)
Beep tone
Picture counter
Restore default settings
Save
Settings
once, repeat
3, 5, 10, 15
30, 45, 60, 90, none
on, off
count down, count up
–
–
Description
Selects whether the slide show is run just once and then ends or is run repeatedly.
Sets the time for which each image frame is displayed.
Sets the interval after which the power save function operates.
Selects whether or not the beep tone sounds.
Selects whether the counter display counts down or counts up.
Returns all the parameters to factory default settings.
Saves the settings.
TV
Software
|
|
|
|
| |
|
|
|
|
| |
Return to “Main | Move to bottom of menu | ||||
menu” (P.36) | |||||
| Select | ||||
!Select the setting. P @Apply the setting.
P o i n t #Change the setting. $Confirm the setting.
h Always select “Save” after you have changed the settings.
Data
45
