A.4 Commands

28

29

2A

2B

2C

2D

2E

2F

30

31

32

33

34

35

36

37

38

39

3A

3B

3C

3D

3E

(j)RIF (reverse image format): Byte 1D

This bit is used to reverse the binary image data output.

0:Output is not reversed

1:Output is reversed

(k)Vender unique parameter: byte 28 and after

Specifies, in byte 28 and after, a vender unique identification parameter, including items such as outline, emphasis, and automatic separation, as required. This parameter is specified in the following format. This parameter does not need data until byte 3E. (It is unnecessary to transfer the unnecessary parameter but the intermediate parameter cannot be omitted.)

Vender unique identification code

γPattern number Outline extraction Image emphasis

Automatic separation

Reserved

Variance rate

Reserved

DTC selection

∙Vender unique identification code: byte 28

Specifies a vender unique identification code. For this scanner, X’00’ must be specified. If other value is specified, this scanner returns the following error information:

- Status:

00001 (CHECK CONDITION)

- Sense key: X’5’ (ILLEGAL REQUEST)

∙γ pattern: byte 29

Specifies γ pattern number for subwindow. For details, see the explanation of the SET WINDOW command.

Appendix A-75