Fujitsu M3097DG 5.1Operator panel operation, 5.1.1Operator panel function, Table 5.2 Functions of the counter, Chapter 5 Operation and Maintenance

Chapter 5 Operation and Maintenance5.1Operator panel operation5.1.1Operator panel function

Operator pane has one LCD, six buttons and three LEDs as follows. The functions of each button

and LED are shown in Table 5.1.

Paper counter

						(−)	(↓)	(STOP)
					50	Previous	Next	Exit	0 Power
									0 READ
								(START)
	Scanner Ready				100000
						ç	è	Enter	0 Check
			Abrasion counter
				Table 5.1 Functions of buttons and LEDs
	Name of the button					Function
		and LED
Button			Next		LCD displays the next screen on the screen flow chart of Figure
					5.1 or 5.2. The settings you have made is effective.
			Previous		LCD displays the backward screen of the screen flow chart of
					Figure 5.1 or 5.2. The settings you have made is effective.
			ç		Moves the cursor (the blinking part) to the left
			è		Moves the cursor (the blinking part) to the right
			Exit		When “Check” LED lights, pressing this button releases error
					status (turn off “Check” and returns to “Scanner Ready” screen).
					When you are setting on the operator, pressing this button returns
					to “Scanner Ready” screen immediately. Note that the setting you
					have select is effective after pressing this button.
			ENTER		Registers the parameter selected by cursor.
LED			Power		Indicates that the scanner is ON.
			READ		Indicates that the scanner is reading documents.
			Check		If it blinks at one second cycle, it means that some temporary
					error occurs. (See section 6.1)
					If it blinks at four seconds cycle, ADF cleaning is necessary.
					If it lights, it means that some alarm occurred. (See section 6.1)
					Table 5.2 Functions of the counter
		Counter				Function
Paper counter					Paper counter counts the scanned sheet from the start of reading to
					Hopper empty or an error detection.
Abrasion counter					Abrasion counter counts the accumulated number of the scanned
					sheet. This counter increments at every 10 sheets. Use this counter
					to check the cleaning cycle or parts replacement cycle.

5-1