A.4 Commands
(2)Window list data: DATA OUT phase (Initiator to Target)
The window list data parameter specifies the window ID for scanner reading. The scanner supports the following.
a.Simplex reading specification Transfer length = 1 Window list data
Byte 0 Window ID=0
b.Duplex reading specification Transfer length = 2 Window list data
Byte 0 Window ID=0
1Window ID=128
If any other combinations are specified, the following errors are returned:
- | Status: | B'00001' (Check condition) |
- | Sense key: | X'5' (Illegal request) |
(3)Operation
When the SCAN command is received, the reading method is defined for the scanner.
Appendix