3.3 Optional image function
(4)Equal to White
[A.4.7 SET WINDOW command/DTC mode]
Equal to White specifies the result of binaizing when the value of a pixel equals the threshold. The default is Equal to White OFF.
The effect of this parameter is slight but, if the scanned image text is bold, set to Equal to White. If the scanned Image text is too narrow or lost, set to Equal to Black (Equal to White OFF).
| Table 3.10 | Parameter of Noise Removal |
| |
Parameter | Value |
| Effect | Default |
|
|
|
|
|
Equal to White ON | B’xxxxxxx1’ |
| Equal to White | Equal to White ON |
Equal to White | B’xxxxxxx0’ |
| Equal to Black |
|
OFF |
|
|
|
|
|
|
|
|
|