Fujitsu M3097DG B.1 Product identification, B.2 Window width and length, Table B.1.1 Product identification, Table B.2.1 Window width and length

Appendix B Interface deference between M3097DG and M3093DG

The interface difference between M3093DG and M3093DG is explained in this appendix. Unless otherwise specified here, the interface of M3097DG is same as that of M3093DG.

B.1 Product identification

M3097DG and M3093DG return the following product identifications when requested by INQUIRY command. The product identification is specified by the bytes 10 to 1F of standard inquiry data.

Table B.1.1 Product identification

Scanner type	M3097DG	M3093DG
Scanner without option	M3097DGdm	M3093DGdm
Scanner with IPC-2D or	M3097DGdim	M3093DGdim
IPC-3D option

M3097DG and M3093DG can emulate following products by the following method.

Table B.1.2 Scanner which can be emulated

	M3097DG	M3093DG
Scanner which can be	M3099G	M3099G
emulated *	M3099GH	M3096G
	M3097D	M3093GX
	M3096GX
	M3093DG
Method of emulation	Selecting in the Setup mode of	Switching the ADF sensor and
	the operator panel	power switch (see OEM
		manual)

* The suffix of the emulated product ID is same as M3093DG/M3097DG.

B.2 Window width and length

M3097DG and M3093DG return following window width and window length in vital product data (byte 14 to 1B). These data means the width and length that can be read by the scanner in basic resolution dots.

Table B.2.1 Window width and length

		M3097DG	M3093DG
Window width (Byte 14 to 17)		X’00001300’	X’00000D80’
Window length(Byte 18 to 1B)		X’00001B00’	X’000015E0
Ex. : X’00001300 = 4864 ,	X’00001B00 = 6912

Appendix B-1