Installation
2 Installation
Remove the board carefully from the shipping carton.
First check if there are any damages before power on the starter kit.
To supply the starter kit, use the delivered
Figure 2-1: AC plug adapter
and insert this adapter into the connection terminal on the
Figure 2-2: AC plug adapter selection
Check the selected output DC voltage of the
Figure 2-3: DC voltage selection
Select the low voltage adapter suitable to the power connector X5 at the
Figure 2-4: Low voltage adapter selection
Now connect the DC low voltage adapter to the Starter kit and plug in the
- 12 - | © Fujitsu Microelectronics Europe GmbH |
