Fujitsu MB91460 SERIES manual 4.9.2 VG48ABC DIN 41612, Distance between VG-Connectors, Name, Mcu-P

SK-91F467-FLEXRAY V1.1

Connectors

4.9.2 VG48ABC DIN 41612 (X14)

Pin	Name		MCU-P.	Pin	Name		MCU-P.	Pin	Name		MCU-P.
A1	CSX0	56		B1	GND	-		C1	CSX1	57
A2	CSX2	58		B2	1.8V	-		C2	CSX3	59
A3	NC	-		B3	GND	-		C3	NC	-
A4	CSX6	60		B4	1.8V	-		C4	RDY	55
A5	BGRNTX	51		B5	GND	-		C5	BRQ	54
A6	RDX	50		B6	NC	-		C6	WRX0	46
A7	WRX1	47		B7	NC	-		C7	WRX2	48
A8	WRX3	49		B8	NC	-		C8	ASX	62
A9	NC	-		B9	NC	-		C9	MCLKO	65
A10	DREQ0	189		B10	NC	-		C10	DACKX0	190
A11	DEOP0	191		B11	NC	-		C11	NC	-
A12	INT12	97		B12	NC	-		C12	SDA0	99
A13	INT13	98		B13	NC	-		C13	SCL0	100
A14	SIN5	109		B14	Vin	-		C14	SOT5	110
A15	GND	-		B15	Vin	-		C15	SCK5	111
A16	INITX	73		B16	Vin	-		C16	GND	-

Table 4-9: VG48 (X14) Signals

Note:

The pin numbers of the VG connectors refer to the male connectors that plugs into the starter kit. Please see chapter 5 to find the right orientation.

4.9.3 Distance between VG-Connectors

To connect own applications to the starter-kit the following figure shows the distance between the VG DIN 41612 connectors.

8,89mm/

350mil

Figure 4-8: Layout of DIN VG Connectors

FMEMCU-UG-910017-11 - 44 - © Fujitsu Microelectronics Europe GmbH