Fujitsu MB88121 SERIES manual Introduction to Softune Workbench, Softune Workbench main window

SK-91F467-FLEXRAY V1.1

Getting Started

5 Getting Started

Make sure Softune Workbench for FR is installed on your PC and the “SK-91F467- FLEXRAY” or “SK-91F467D-208PFV” is ready to use (power-on (X5), serial connection (UART4) to COM port of the PC). Refer to Chapter 2 Installation for details on the hardware and software installation.

5.1Introduction to Softune Workbench

Start Softune Workbench. Select <File> <Open Workspace> to load the first example “SK- 91F467-FLEXRAY_test.wsp”. All examples can be found in the folder \software\examples on the starter kit CD-ROM. It is recommended to copy this folder to the local hard-drive. In the project tree on the left side, you can open the “source”-folder which contains the source-files registered to this project. A double-click on one of the files will invoke the built-in editor, which supports syntax-highlighting, tags and various other functions.

Figure 5-1: Softune Workbench main window

Note:

You may customize the editor by a right-click on the editor window.

© Fujitsu Microelectronics Europe GmbH - 45 - FMEMCU-UG-910017-11