Furuno NX-700B manual Adjusting LCD Dimmer, All message display 518 kHz

2. OPERATION

At the default setting, the equipment functions as below;

When the results of the check are OK, ALL MESSAGE display for 518 kHz appears. This screen shows all messages received in 518 kHz.

You can switch 518 kHz (International message) and 490 kHz (local message) to display. The NX-700A is preset to print all received message out.

All message display (518 kHz)

Note 1: To display all received messages in 490 kHz, press ◄ or ►.

Note 2: To cancel the printing all received messages out, see page 2-11.

To turn the power off, press the key again.

Note: If NG appears for any test, try to press any key to go to the next stage. The equipment, however, may not be operated properly. Contact your dealer if the problem persists.

2.3Adjusting LCD Dimmer

You can adjust LCD and panel dimmer with the + DIM – key. The adjustment range is 0 (dark) to 9 (bright).

+: Raises the dimmer.

-: Decreases the dimmer.

2-2