Furuno NX-700B manual Receiver Unit, General mounting considerations, Mounting Method

4. INSTALLATION

4.2Receiver Unit

General mounting considerations

•The mounting location should be well ventilated and dry.

•The unit can be mounted on bulkhead or the desk.

•Secure the maintenance space shown in drawing at the back of this manual for ease of maintenance and service.

•Compass safe distances are: Standard: 1.15 m, Steering: 0.75 m

Mounting Method

Fasten the receiver unit with four self-tapping screws (5x20, supplied as installation material). For bulkhead mounting, do the follows.

1.Tighten lower self-tapping screws so there is 5 mm clearance between bottom of screw head and bulkhead.

2.Hook the receiver unit on the lower screws.

3.Tighten upper screws followed by the lower screws.

Fixing hole 2- 6 210+1

205+1

6
8
210+1	Notch

4-3